A solid material thickness is the "be-all and end-all" of your new custom wardrobe from Furnfab.com.de! To ensure that your wardrobe withstands every load without a trace even after years, we use the following panel thicknesses:

Body: 19mm
Front: 19mm
Shelves: 19mm
- optionally available for an extra charge in 25mm
Drawer body: 16mm
Drawer bottom: 8mm
Back panel: 8mm

Outstanding quality is visible in the details. Cabinets from Furnfab.com.de are always equipped with an 8mm (!) thick back panel, which provides your cabinet with immense stability.

It is also important that the back panel is not simply nailed to the back of the cabinet, but is screwed in with high-quality metal connectors. And this is done from the front! This way, you can position your cabinet exactly where it is intended to stand.

You can individually select the handles for your furniture. A variety of designs are available to you. Whether small or large, simple or eye-catching, round or square, shiny or matte. On request, we can supply almost any handle for your wardrobe.

Download our complete selection of handles here.

As an option, we offer our sideboards with internal cabinet doors and our cabinets with hinged doors the grip-free Push to Open mechanism. With this modern Push to Open technology, the door opens and closes with a single press.

To ensure your wardrobe can be perfectly aligned even on uneven floors, we equip your wardrobe with an adjustable plinth foot (standard height 80mm, modifications and removal possible!).

What has proven effective in high-quality kitchen technology should not be missing in your new dream wardrobe! With these plinth feet, you can optimally level your wardrobe horizontally using a spirit level, which ensures optimal stability for your wardrobe!

The doors on your cabinet are mounted with high-quality branded fittings that are adjustable in all three directions (up/down, left/right, or front/back).

This allows you to perfectly align your doors!

Shelves are secured by floor supports with an additional hook in all wardrobes and shelves. The hook ensures that your shelf does not wobble or slip.

A small detail with a big impact.

Please note that the shelves are flush with the body only in furniture without fronts, such as shelves.

For shelves (19mm thickness, optionally also 25mm thickness available for an extra charge), we always drill a hole grid with a spacing of 32mm. This way, you can always hang your shelves flexibly.

For all furniture with fronts, such as our cabinets, the shelf is set back by 2 cm. This design prevents you from losing flexibility when arranging the shelves due to the hinges.

Of course, only solid metal clothes rails are used in your new wardrobe. The clothes rails are custom-made to fit your exact width.

The holders for your clothes rail are also made of metal, ensuring durability and robustness.

For the clothes rail holders, we drill a hole grid with a 32mm spacing, just like for the shelves, allowing you to hang the clothes rail at your desired height.

You can adjust the shoe insert shelf flexibly within your wardrobe thanks to the continuous hole pattern. The angle can be adjusted between 20° and 35° in two directions. The self-adhesive plastic strip can be placed at the appropriate position for your shoe type to prevent your shoes from sliding off.

To give you a lot of flexibility and creative freedom in configuring your furniture, we offer four different drawer options, which differ in appearance and construction. Here you can find more technical information about our drawers.

If you wish, we can also equip your wardrobe with a wide-angle hinge. The wide-angle hinge has an opening angle of up to 170° and is very practical for internally mounted mirrored doors. Please note that we cannot offer you soft close for your wardrobe doors if you choose the wide-angle hinge.

Like our standard 3-way branded hinge, the wide-angle hinge is adjustable in all three directions (up/down, left/right, or front/back), allowing for the perfect alignment of your wardrobe doors.

Our clothing lifts are perfect for especially tall cabinets. With a single motion, all your garments are easily accessible, even at great heights.

The battery-operated LED light, which can be recharged via a micro-USB port, can be flexibly used in cupboards or shelves. The lamp is activated by a motion sensor, so it only lights up when you need it.

For shallow wardrobes (e.g., less than 52 cm deep), it makes sense to use a pull-out clothes hanger holder instead of a hanging rail. This allows you to hang your clothes in the front of your wardrobe without needing much depth. The clothes hanger holder made of steel has a load capacity of up to 10 kg.

The frontal trouser hanger is attached to both sides of the wardrobe. Due to the two telescopic tubes, it is adjustable in width.

The trouser hanger features a partial extension on ball-bearing running rails made of aluminium. The plastic parts are made from grey glass-fibre reinforced nylon, the profiles are made from silver-anodised aluminium, and the tubes are made from chrome-plated steel. With the mounting screws, you can freely position the extension exactly where you need it.