With the help of bars, you can divide your sliding door horizontally and combine different fillings. This allows you to give your sliding door a unique look.

To achieve maximum smoothness, your sliding door is guided in the ceiling track with high-quality ball bearings. The maintenance-free ball bearings ensure that you will enjoy your sliding door even after years of intensive use.

If desired, you can also equip your sliding door with a soft-closing self-retraction mechanism. With the self-retraction, your sliding door slows down before reaching the stop and then elegantly glides into its end position.

If you do not want to equip your sliding door with a self-retraction mechanism, you will still receive a standard damper that prevents the door from slamming shut.

You can customise your sliding door at Furnfab.com according to your preferences. You have a wide selection of high-quality decor fillings, as well as lacquered and satin glass or mirrors. We only offer safety glass from domestic production.
What’s special about the decor fillings is their lasting lightfastness. The decors do not darken and look just as good after years as they did on the first day! We would be happy to send you our decors by post for free, so you can choose your desired filling at home and in peace.

To order decors, simply go to the "Samples" section in our main navigation.

The weight of the sliding door rests on the high-quality floor track, minimising the load on the ceiling track. The floor track can be glued quickly and easily to all solid floor coverings, e.g. wood or stone, using commercially available silicone or assembly adhesive.

Impressive: the attached floor rail is not only easy to fit, but also impresses with its low height of just 4.5 mm. Quality also means attention to detail!

Especially large sliding doors and glass panels can significantly increase the weight load on the rollers. For this reason, your new sliding door will be equipped with sturdy tandem rollers. Each door leaf will be fitted with two tandem rollers each, ensuring optimal weight distribution.

The top guide rail can be attached to the ceiling as well as to the wall, regardless of the material the wall is made of. The upper rail guides the panels and does not need to bear any weight. Side end caps for the guide rail are, of course, included.